Integrated Controls, Inc's Automated Lift Control (ALC Lift-Pac™)
System is a custom designed Process Control Panel that incorporates
years of programming experience with multiple VFDs for constant
level, pressure, or flow control in all sizes. Our ALC Lift-Pac™
Systems currently service municipal fresh and wastewater applications
throughout the United States and Canada. Put
ICI's years of experience to work for you on your next complex
pumping project.
|
|
| CHOOSE THE ALC LIFT PAC™ SYSTEM THAT"S RIGHT FOR YOU |
|
|
| |
|
|
|
|
|
| Save Money
on Your Electric Bill |
|
Using
VFDs in place of starters or soft starts reduces amp draws
on all pumps to that of a perfectly-sized motor
for
your current pumping needs. Pump motors running on VFDs use
only a percentage of the rated horsepower to maintain a given
level or run at a given RPM. Energy savings generate fast
payback
both today and into the future.
|
| Save Money
on Equipment Maintenance |
|
Slow
starts and stops help reduce high maintenance costs on pumps,
valves, seals, and other related hardware.
|
| Reduce Blockage
on Forced Mains |
|
Maintaining
an above-minimum flow stops settling of solids in a forced
main that can result from frequent starts and stops that result
from
short-cycling of large pumps during low flow times.
|
|
You
can size your pumps for tomorrow’s needs, yet the motors
will only consume power necessary to keep up with today’s
demands. The ALC Lift-Pac™ combines leading edge technology
with years of control experience and a thorough understanding
of wastewater and freshwater process and flow control. It’s
the most efficient operating system available on the market.
|
| Reduce Customer
Complaints |
|
Customer
property damage claims resulting from water hammer is totally
eliminated by speed-controlled pump starts and stops, utilizing
sensor feedback from the pipeline itself.
|
| Downsize Generator
Applications |
|
When
a motor starts from dead stop, it requires a much larger quantity
of power than necessary to keep it running under full load.
When a generator is sized, it must be equipped with enough power
to start up the motor, not just keep it running. When using
a VFD, the high rush of power upon start up is eliminated, thus
reducing the total power required by the generator. Soft starts
will not fill the bill in this application because of their
high voltage reducing factor. When using soft starts, you must
actually increase the generator size. Contact your local standby
power supplier for more details.
RETURN TO TOP
|
|
|
- Skid Mount Package Option
- Prefab Systems
- Constant Level, Pressure, or Flow
- Suction and Discharge Pressure Management
- Water Surge Elimination
- Auto CL2 Injection Control to 0.1PPM
- VFD Panel Temperature Management
- Bypass Starters for Redundancy
- Remote Interface Options for Dry Wells
- SCADA Ready
- Advanced Alarming
- Advanced Fault Diagnostics
- Simple to Use Graphical Display (GUI)
- Custom Designs to Fit your Space and Application
- Matched Drive and Motor Package
- NEMA 1, 3R, 4, 4X, and 12 Type Enclosures
RETURN TO TOP |
|
| |
- Time and Money Savings with Pre-Engineered Pumping Solution
- Single Source for Motor Control, Process Control, and Integration
- Sensors and Flow Meters Sized Efficiently for Optimum Performance
and Seamless Integration
- Simple and Painless Single-Source Start-Up
- Intuitive CAD Drawings for Easy Hook-Up to Utilities
- Complete Calibration of Sensors by our Technicians
- UL and cUL Listed 508
and 698
RETURN TO TOP |
|
|
- Water Booster Systems
- Water Well Controls
- Water Tower Level Controls
- Hydro-Pneumatic Pumping Systems
- Sewer pumping Systems
- Wet Well Level Controls
- D. O. Level Control
- Aeration Systems
- Chemical Injection
RETURN TO TOP |
|
|
